Upgrade Firmwares OPtimus ME

silahkan di baca

Yang dibutuhin untuk upgrade/downgrade firmware optimus me:

1. Kdz FW updater (install) =  http://www.unclenet.de/files/KDZ_FW_UPD_EN.7z

2. B2C (install) = http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe

3. LG USB Mobile Drive (install) = http://www.mediafire.com/?qvdbresp5nntb6x

nih untuk firmwares-nya..

LG Optimus Me Official Firmwares V10C Download

• [ASEABK] http://csmg.lgmobile.com:9002/LGP350/V10c_00/V10C_00.kdz

LG Optimus Me Firmwares V10E Download:

• [ACISSV] http://depositfiles.com/en/files/4y603iksc
• [ABALSV] http://depositfiles.com/en/files/4vh72o8kn

LG Optimus Me Official Firmwares V10F Download:

• [ACISSV] http://csmg.lgmobile.com:9002/LGP350/V10F_00/V10F_00.kdz
• [ABALSV] http://csmg.lgmobile.com:9002/LGP350/V10F_00/V10F_00.kdz

Caranya :

1) take out of the archive folder with flasher KDZ_FW_UPD and move it to the root of drive C:

2) In the C: \ KDZ_FW_UPD create a folder named LGP350

3) In her move firmware format. Kdz

4) Set United LG Mobile Driver (if not installed)

5) Charge your phone to fully charge (or almost until)

6) Connect your phone and wait until the install driver software (if you first connected it)

7) Turn off the LGE Virtual Modem. To do this in Windows go to Control Panel> System> Hardware> Device Manager> Modems> Right-click on the LGE Virtual Modem and click Disable.

8) Turning off the phone from the PC and switch off the phone

9) Hold button button improve the volume + button decrease the volume + power button, the yellow is displayed Emergency Mode - emergency mode. In principle, proshivalschik itself can put the device in this mode, but for safe drivers and to avoid future problems, it is better to take this step alone.

10) connects to a computer our device (sticks one end of the cord into the computer, the other into the phone)

Tip: preferably before flashing remove the memory card, SIM-card.

Firmware

1) Run the flasher KDZ_FW_UPD

2) In the "Type" select "3GQCT" (3G Qualcomm CDMA Technologies)

3) Specify the path to the firmware ( V10F_00.KDZ ), by clicking on the button to the right of the field "KDZ file

4) Press the button "Start update"

5) I went to the firmware process

6) Do not unplug the phone!

7) We are waiting for notification of completion of the firmware (== Completed ==), then close the window Flasher and disconnect the phone.

8) Finish

nb:disarankan pakai firmware yang terakhirV10f[ACISSV] or V10f[ABALSV]

sumber : ka*kus.us dan lg-phon*s.org